Click image to view full size image
Application Scope and Installation Position
TRS3-C Series surge protective device suitable for the new energy wind power generation system,its working voltage covers 500V,800V and 1000V.It is installed in the main power system at DC circuit,to protect against the indirect lighting current,direct lighting current or other instantaneous over voltage.
Product Features
1.Plug in/out style protective device.
2.The coler of visible window shows operating status.
3.Double protection of over-heat and over-current.
4.Have the accessory of remote signaling interface,could be remote control.
Products show:
Technical Parameters:
TRS3-C Series surge protective device suitable for the new energy wind power generation system,its working voltage covers 500V,800V and 1000V.It is installed in the main power system at DC circuit,to protect against the indirect lighting current,direct lighting current or other instantaneous over voltage.
Product Features
1.Plug in/out style protective device.
2.The coler of visible window shows operating status.
3.Double protection of over-heat and over-current.
4.Have the accessory of remote signaling interface,could be remote control.
Products show:
Technical Parameters:
| Model and specification | TRS-C |
| Rated operating voltage | 220v/380v |
| Max continuous operating voltage | 385v |
| Voltage protective level | 2.0kv |
| Max discharge current | 60KA |
| Nominal discharge current | 30KA |
| Response time | 25ns |
| Proponse grade | IP20 |
| Indication of invalidation | Aging invalidation:green Normal. Red: Invalidation |
| Configuration dimension | Three-phase four wire: 72*62*902 |
| Application | Primary protection for in line |
| Operating condition | Temp: -40ºC-+70ºC |
| RH<=95% | |
| Sea level elevation<=3km | |
| Remote signal function | Can also picking |
| Remarks | Other max continuous operating voltage can be customized |