Click image to view full size image
Application Scope and Installation Position
TRS-C Series surge protective device suitable for the new energy wind power generation system,its working voltage covers 500V,800V and 1000V.It is installed in the main power system at DC circuit,to protect against the indirect lighting current,direct lighting current or other instantaneous over voltage.
Product Features
1.Plug in/out style protective device.
2.The coler of visible window shows operating status.
3.Double protection of over-heat and over-current.
4.Have the accessory of remote signaling interface,could be remote control.
Products show:
Technical Parameters
| Type | TRS4-C |
| Rated operating voltage Un | 220v |
| Max continuous operating voltage Uc | 385V |
| Nominal Discharge Current In(8/20μS) | 20kA |
| Max Discharge Current Imax(8/20μS) | 40kA |
| Residual Voltage Up | 1.8kV |
| Response Time ns | ≤25ns |
| Operating Condition | Temp-40ºC- +70ºC RH≤95%(25ºC) Sea level elevation≤3km |
| Installation | Standard guide card loaded |